(SOL11523) Note: For information about rebuilding the RAID configuration, refer to SOL11525: Rebuilding the RAID configuration after a hard drive replacement.
When rebuilding the RAID configuration on an ARX system using the raid rebuild command, if one of the drives has failed, or if one of the drives has on old firmware version installed, the raid rebuild command will fail and error messages that appear similar to the following exampleare logged:
:ROOTD-0-ERR-RAID_REBUILD_DRIVE_FAILED:: Rebuild drive fai
↧
General Solution: Error Message: CLI-0-ERR-RAID_OPERATION_FAILED:: The raid rebuild command failed
↧