General Solution: Activating and installing a license file from the command line
(SOL2595) Purpose You should consider using this procedure under the following conditions: You want to activate and install a new license using the command line You want to activate and install a...
View ArticleGeneral Solution: BIG-IP device group members must run the same software version
(SOL13667) Summary The ConfigSync feature allows you to synchronize configuration information from one device to other devices belonging to the same device group. This article provides information...
View ArticleKnown Issue: Performance HTTP virtual connections may use the incorrect...
(SOL13843) Description Performance HTTP virtual connections may use the BIG-IP non-floating self IP address as the source address when connecting to pool members. This issue occurs when the following...
View ArticleGeneral Solution: Rebuilding the RAID configuration after a hard drive...
(SOL11525) Except for the ARX 500 platform, ARX systems have two system disk drives. The two disk drives provide RAID Level 1 redundancy. These drives contain software images, reports, scripts, log...
View ArticleGeneral Solution: Finding the serial number for your ARX system
(SOL8239) Note: For instructions aboutfinding the serial number or registration key for other F5 products, refer to SOL917: Finding the serial number or registration key of your F5 device. You can find...
View ArticleGeneral Solution: Performing a ConfigSync using the Configuration utility
(SOL13920) Purpose You should consider using this procedure under the following condition: You want to initiate a ConfigSync operation from a specific device group member. Prerequisites You must meet...
View ArticleGeneral Solution: DNS prefetching feature on client browsers may negatively...
(SOL13930) Summary This article provides information about how DNS prefetching features in various browsers may affect F5 products. Description DNS prefetching is a common feature in some modern client...
View ArticleGeneral Solution: Configuring BIG-IP to load balance traffic to nodes that...
(SOL3009) Note: For information about BIG-IP version 4.x compatibility with redundant network interface cards, refer to SOL3182: Configuring BIG-IP to load balance traffic to nodes that use redundant...
View ArticleGeneral Solution: Forcing a BIG-IP device group member to initiate a...
(SOL13887) Purpose You should consider using this procedure under the following condition: You want to force a specific device group member to initiate a ConfigSync operation. For example, this...
View ArticleGeneral Solution: BIG-IP software support policy
(SOL5903) Note: The BIG-IP software support policy described in this article also applies to Virtual Edition (VE) releases of the software. Note: The F5 software support policy described in this...
View ArticleGeneral Solution: The BIG-IP release matrix
(SOL9412) The following release matrix indicates BIG-IP versions, release dates, and SCCP and EUD versions that were included with the original release: Note: Current versions of SCCP F/W and EUD may...
View ArticleGeneral Solution: The BIG-IP APM Kerberos configuration incorrectly defines...
(SOL13922) Affected Documents The Configuring Kerberos Authentication with End-User Logons chapter of the BIG-IP Access Policy Manager Authentication Configuration Guide version 11.0.0 through 11.2.1....
View ArticleGeneral Solution: The CSRF protection feature does not apply to iframe...
(SOL13077) The BIG-IP ASM system cross-site request forgery (CSRF) feature allows you to protect against CSRF attacks by injecting a JavaScript token into the response pages for certain URLs. You can...
View ArticleKnown Issue: In certain cases, BIG-IP 9.4.x may fail to install on a 6900 or...
(SOL11283) Note: The issue described in this Solution affects only the BIG-IP 6900 and 8900 platforms. The BIG-IP 6900 platform is supported only in versions 9.4.6 and later, and the BIG-IP 8900...
View ArticleKnown Issue: The BIG-IP may incorrectly associate a custom protocol profile...
(SOL13944) Description When you use the BIG-IP Configuration utility to create a new virtual server, the BIG-IP system may incorrectly set the default protocol profile. This issue occurs when all of...
View ArticleKnown Issue: The BIG-IP GTM Configuration utility allows the monitor type...
(SOL13931) Description The BIG-IP GTM Configuration utility allows a monitor type called none to be incorrectly associated with a wide IP pool. Impact In BIG-IP GTM 11.x,wide IP pools associated with...
View ArticleKnown Issue: The BIG-IP system may continue to generate VLAN failsafe traffic...
(SOL13933) Description The BIG-IP system may continue to generate VLAN failsafe traffic after receiving responses to VLAN failsafe requests. This issue occurs when all of the following conditions are...
View ArticleGeneral Solution: Backing up and restoring BIG-IP configuration files (11.x)
(SOL13132) This article applies to BIG-IP 11.x. For information about other versions, refer to the following articles: SOL11318: Backing up and restoring BIG-IP configuration files (10.x) SOL3499:...
View ArticleKnown Issue: The B4200 blade may reboot with a 'Machine check exception'...
(SOL13807) Description VIPRION B4200 blades may spontaneously reboot. This issue occurs when all of the following conditions are met: The High-Speed Bridge (HSB) interface is running version Build...
View ArticleKnown Issue: The BIG-IP GTM iRule with the cname command may result in an...
(SOL12574) Description A BIG-IP GTM iRule with the cname command may result in an error when the time-to-live (TTL) value is specified. For example, the following BIG-IP GTM iRule called my_rule is...
View Article