Informational: The BIG-IP file size limits for Certificate Revocation List files
(SOL10054) The BIG-IP system supports the following Certificate Revocation List (CRL) file sizes: PEM format: 4 megabytes (MB) DER format: 3 MB If you attempt to load an SSL profile with a CRL file...
View ArticleHow-To: Configuring syslog to minimize delays when sending remote log...
(SOL13160) This article applies toBIG-IP 11.x. For information about other versions, refer to the following article: SOL13081: Configuring syslog to minimize delays when sending remote log messages...
View ArticleInformational: BIG-IP GTM provides persistence records for a wide IP after a...
(SOL6082) If persistence is enabled for a wide IP and the pool or data center is disabled, the Drain Persistent Requests variable causes the BIG-IP GTM system to provide persistence records for the...
View ArticleKnown Issue: Synchronized configuration objects may contain invalid...
(SOL14817) Description Synchronized configuration objects may contain invalid parameters after you delete an object and create a different object type with the same name. This issue occurs when all of...
View ArticleHow-To: Determining the GRUB bootloader version on the BIG-IP system
(SOL14658) Purpose You should consider using this procedure under the following condition: You want to determine which version of GRUB bootloader your BIG-IP system uses. Prerequisites You must meet...
View ArticleKnown Issue: The system does not apply link reference changes to the...
(SOL14792) Description The system does not apply link reference changes to the currently running BIG-IP GTM or BIG-IP Link Controller server or virtual server object configuration. This issue occurs...
View ArticleKnown Issue: The Traffic Management Shell cannot be configured to display...
(SOL13237) Description You cannot configure the Traffic Management Shell (tmsh) to display host names instead of IP addresses. In versions prior to BIG-IP 11.0.0, you could set the global-settings...
View ArticleOverview: Overview of the positive and negative caching features
(SOL13714) Summary The positive and negative caching features reduce the BIG-IP WebAccelerator cache load by only caching items most likely to be accessed again in the future, and not caching items...
View ArticleHow-To: Configuring SYN cookie protection
(SOL14805) Purpose You should consider using this procedure under the following condition: You want to configure SYN cookie protection for the BIG-IP system. Prerequisites You must meet the following...
View ArticleChange in Behavior: The BIG-IP WebAccelerator X-PvInfo header is renamed the...
(SOL13346) Old Behavior In BIG-IP WebAccelerator 9.x and 10.x, an X-PvInfo: HTTP header was inserted into all processed HTTP traffic. The X-PvInfo header contained information, such as the method of...
View ArticleKnown Issue: APM iRule for ActiveSync may cause the connection to reset
(SOL14785) Description When you use the BIG-IP APM iRule for Microsoft ActiveSync, the connection may reset. This issue occurs when all of the following conditions are met: You configure a BIG-IP APM...
View ArticleHow-To: Removing the URL box from the webtop hometab (11.x)
(SOL13592) Purpose You should consider using this procedure under the following condition: You want to restrict access to only web resources defined on the webtop. Prerequisites You must meet the...
View ArticleTroubleshooting: Troubleshooting ConfigSync and device service clustering...
(SOL13946) This article applies to BIG-IP 11.x. For information about other versions, refer to the following article: SOL7024: Overview of the ConfigSync process (9.x - 10.x) Purpose You should...
View ArticleKnown Issue: Connections that terminate while processed by an iRule on a...
(SOL13647) Description Connections that terminate while being processed by an iRule on a performance Layer 4 virtual server may cause the Traffic Management Microkernel (TMM) to produce a core file....
View ArticleInformational: The BIG-IP system sends high-speed logs through TMM interfaces...
(SOL14459) Summary This article details the remote log server destination limitation when you configure the high-speed logging feature on the BIG-IP system. Description The high-speed logging feature...
View ArticleHow-To: Configuring the Automatic Sync feature to save the configuration on...
(SOL14624) Purpose You should consider using this procedure under the following condition: You want to configure the Automatic Sync feature to save the configuration to file on the remote devices...
View ArticleKnown Issue: ConfigSync operations may fail after you create a private cli alias
(SOL14717) Description ConfigSync operations may fail after you create a private cli alias. This issue occurs when the following condition is met: The device group is configured to perform incremental...
View ArticleInformational: The Deferred Accept TCP Profile option may not be compatible...
(SOL4654) When enabled, the Deferred Accept TCP profile option specifies that the system does not dedicate resources to the connection until the system has received the data packet from the client....
View ArticleKnown Issue: The BIG-IP system may drop WebSocket traffic
(SOL14814) Description The BIG-IP system may drop WebSocket traffic. This issue occurs when all of the following conditions are met: You have a virtual server configured with an HTTP profile. A...
View Article